Images are representations only.
GM35 In-situ Gas Analyzer
Brand: SICK Canada
Simultaneous or as individual measurement: the GM35 gas analyzer measures CO2, H2O and CO, or N2O, as well temperature and pressure – and it does this reliably, quickly, and economically.
As an in-situ gas analyzer, the GM35 detects these gas components directly in the gas stream without gas sampling. Reliability, precision, and short response time of the GM35 offer a key advantage for efficient control loops in all CO and CO2-generating processes.
At a glance
- Dynamic humidity correction
- Fast in-situ measurement directly in the process
- Simultaneous determination of up to three gas components, temperature, and pressure
- No gas sampling and conditioning
- Gas testable version of measuring probe available
- Integrated self-test and control functions
- Dynamic moisture measurement directly within the process
- Provision of real moisture reference values
- Accurate measured values thanks to in-situ measurement
- Detects fast or transient process deviations
- Representative measurement by selecting a suitable measuring probe or cross-duct version
Specifications
Brand
Certifications & Approvals
- CE
Enclosure Rating
- IP54
- IP67
- IP66 / NEMA 4X
- IP65
Measuring Range
- N2O: 0 to 60 ppm / 0 to 2,500 ppm
- H2O: 0 to 25 Vol.% / 0 to 100 Vol.%
- CO2: 0 to 22.5 Vol.% / 0 to 100 Vol.%
- CO: 0 to 180 ppm / 0 to 20,000 ppm
Ambient Temperature
- –20° to 50° C, Temperature Change Maximum ±10° C/h
Storage Temperature
- –40° to 55° C
Humidity
- Ambient: ≤ 96% RH Non-Condensing
Power Supply
- Power Consumption ≤ 150 VA (GPP), ≤ 350 VA (Sender/Receiver Unit)
- Sender / Receiver Unit & GPP: 115 Vac / 230 Vac, 48 to 62 Hz
Accuracy
- 1%
Process Pressure
- GPP: -120 to 200 hPa
- GMP & Reflector Unit (cross-duct version): -60 to 30 hPa
Materials of Construction
- Steel ST37
- GPP: Cermics, PTFE
- Stainless Steel 1.4571 / 1.4539
Communication
- Serial
- CAN Bus
- RS-232
Documentation
Data Sheets
Product Manuals
- SCU-P100 Control Unit addendum to operating instructions pdf 437 KB
- Additional information for analyzers, measuring devices and traffic sensors according to EN IEC 61010-1:2011 -Supplement to operating instructions pdf 908 KB
- GM35 In-situ IR Gas Analyzer, Cross-Duct Version operating instructions pdf 8.0 MB
- GM35, Measuring probe version operating instructions pdf 7.2 MB
- Safety information for non-Ex analyzers pdf 2.8 MB
- SCU, Control unit operating instructions pdf 2.0 MB
- SLV4 Purge Air Unit operating instructions pdf 1.2 MB
