Images are representations only.
GMS800 FIDOR Extractive Gas Analyzer
Brand: SICK CanadaA member of the GMS800 analyzer family, the GMS800 FIDOR extractive gas analyzer is ideally suited for emission monitoring according to regulatory requirements (in waste incinerators, cement and/or power plants, for example). Based on the proven flame ionization detection principle, the GMS800 FIDOR measures total hydrocarbon concentrations in gases at both trace levels and high concentration levels.
The GMS800 FIDOR is available in three versions: the GMS810 FIDOR with integrated control unit (BCU), the GMS811 FIDOR with separate control unit (BCU) and the GMS840 FIDOR with a space-saving wall housing. The housing makes integration into existing systems such as SICK's MCS100 E HW multi-component analyzer very easy.
At a glance
- Standard 19” enclosure for easy integration into all industry-typical systems
- Space-saving wall housing (stand-alone)
- Nearly maintenance free ejector pump delivers sample gas to the analyzer
- Integrated catalytic converter (option) provides very clean zero gas
- Automatic regulation and compensation of process pressure fluctuations
- Protective filter at sample gas inlet
- High degree of linearity (≤ 2%) for very low and high measuring ranges
- High availability of 99.5%
- Convenient remote diagnosis and operation via Ethernet using SOPAS-ET software
- Minimum maintenance costs due to the absence of moving parts
- Replacement of complete assemblies and modules makes repairs easy
- Compatible with predecessor systems
- Hydrogen as fuel gas, expensive helium is not required
- Low operating costs, e.g., due to low hydrogen consumption (typical 30 ml/min)
- The GMS811 FIDOR, on which the control unit (BCU) can be separated from the analyzer unit, supports convenient control and monitoring from a central control room.
Specifications
Brand
Certifications & Approvals
- CE
- MCERTS
Enclosure Rating
- IP54
- IP40
Gas Flow Rate
- ≤ 120 l/h
Process Temperature
- ≤ 230° C
Process Pressure
- -120 TO 120 hPa Relative
Humidity
- Ambient: ≤ 95% Non-condensing
- Process Gas: Non-condensing
Ambient Temperature
- 5° to 40° C
Storage Temperature
- -20° to 70° C
Ambient Pressure
- 900 to 1,100 hPa
Power Supply
- 100-120 Vac, 220-240 Vac, 50 to 60 Hz, Power Consumption ≤ 300 VA
- GMS810, GMS811: 90-240 Vac, 47 to 63 Hz, Power Consumption ≤ 450 VA
Ssample Gas Connection
- G 1/4″
- Straight Screw-in Connection, 6 mm, G 1/8", Stainless Steel
- 12 mm Straight; 1/2″ Straight; 10 mm 90° Bent
- G 1/4″; G 1/8″ Double, without Antikink; G 1/8″ without Antikink
Measuring Range
- 0 to 15 mg/m³ / 0 to 10,000 mg/m³
Response Time
- ≤ 2.5 s
Communication Interface
- Modbus
- Ethernet
- RTU RS-485
