Images are representations only.
FLOWSIC100 Flare Gas Flow Measuring Instrument
Brand: SICK CanadaThe FLOWSIC100 Flare product family is designed for flare gas and steam flow measurements. The product family is characterized by a unique flow-optimized sensor design. This innovative design minimizes flow-generated noise and signal drift when gas velocities are particularly high. Modern signal processing and high-efficiency transducers enable high time resolution for signals and thus deliver accurate measurements, even at extremely low gas flow rates.
The standard system configuration includes two sender/receiver units or one measuring probe and the MCUP control unit. The MCUP unit is used to input and output signals; to calculate reference values (normalization), molecular weight and mass flow; to record gas volumes; and to provide user-friendly control via the LCD display.
At a glance
- High-resolution measurement and short response time
- Innovative sensor design for very high gas velocities and gas temperatures up to 280° C
- Optimal signal transmission even under atmospheric pressure
- Detached installation of the control unit up to 1,000 m away
- Single and multi-path configuration, opt. Probe version
- Zero point test in the field according to factory standard
- Control cycle for automatic self-diagnosis / signal optimization
- Reliable process control due to exact measurement near the zero point
- High measurement availability even in the case of emergency shutdowns with gas velocities of up to 120 m/s
- A solution for the measurement of flare gas and steam injection
- Cost savings due to detached installation of the control unit possible in the safe area
- System solution for the control of three different measuring points with a common control unit
- Cost savings due to one-sided installation when using FLOWSIC100 EX-PR probe version
- Optimal device performance due to continual function monitoring and extended diagnostic functions in the field
Specifications
Brand
Certifications & Approvals
- CE
- cCSAus
- IECEx
- ATEX
Enclosure Rating
- IP67
- IP66
- IP65
- IP20
- Type 4
Measured Value
- Sound Velocity
- Mass Flow Rate, Molecular Weight, Volumetric Flow a. c., Volumetric Flow s. c.
- Gas Volume and Mass
- Gas Temperature
- Gas Velocity
Hazardous Area
- 1G, 2G, 3G, Class I Division 1, Class I Division 2, Ga, Gb, Gc
Gas Temperature
- Not for FLOWSIC100 EX/EX-RE Zone 1 and Class I, Division 1
- Low Temperature: –196° to 100° C
- High-temperature Zone 2: –70° to 260° C
- High-temperature Zone 1: –70° to 280° C
- Standard: –70° to 180° C
Operating Pressure
- FLOWSIC100 EX-S 90°: –0.5 to 19 bar(g)
- –0.5 to 16 bar(g)
Nominal Pipe Size
- 4" to 72"
Communication
- HART
- Modbus
- Ethernet
- RS-232 / RS-485
- USB
- PROFIBUS DP
- Foundation Fieldbus
